Magazie de marfuri - Gara Cristian - Linia 203 (scara N)

  • In perioada urmatoare o sa vi se solicite modificarea parolei. Pana la modificarea parolei, userul poate figura ca si blocat, odata modificata parola, userul este reactivat automat.
    Pentru orice problema va rog folositi butonul "Contact"

Frank_L

Active Member
Trenulist
23 Octombrie 2013
214
209
UE, Germania
LOCATION
UE, Germania
Bun? seara!

At the moment I'm making good progress with my station construction. That's why I want to start tinkering with the warehouse/depot. It is about the warehouse/depot in the station Cristian, between Brasov and Zarnesti.

I took several pictures in the last few years and did a few simple measurements of size. Unfortunately I do not have all dimensions. But I think I can live with it. So I sat down and drew warehouse/depot. I will build the warehouse/depot with paper and cut it with the cutter. This is a very cheap method.

First, I built a simple example and made a test. As far as everything seems to fit.
Cristian_5383.jpg

Cristian_5384.jpg
Cristian_5384b.jpg

Cristian_5385.jpg
Cristian_5385b.jpg

Cristian_5386.jpg
Cristian_5386b.jpg

Cristian_5388.jpg
Cristian_5388b.jpg

Cristian_5389.jpg


So far so good. I simply printed out the drawing several times. I build everything from multiple layers. The paper should not be too thick to cut well. I took 200g of paper for the walls and cut out the parts.
Cristian_5393.jpg

Cristian_5390.jpg
Cristian_5391.jpg


În acest moment fac progrese bune în construc?ia postului meu. De aceea vreau s? încep s? revin cu magazie de m?rfuri. Este vorba despre magazie de m?rfuri din sta?ia Cristian, între Bra?ov ?i Zarnesti.
Am f?cut mai multe poze în ultimii ani ?i am f?cut ni?te m?sur?tori de dimensiuni simple. Din p?cate, nu am toate dimensiunile. Dar cred c? pot tr?i cu asta. A?a c? m-am a?ezat ?i am desenat magazie. Voi construi magazie de hârtie ?i o voi t?ia cu t?ietorul. Aceasta este o metod? foarte ieftin?.
În primul rând, am construit un exemplu simplu ?i am f?cut o încercare. În m?sura în care totul pare s? se potriveasc?.

Pân? atât de bine. Am imprimat desenul de mai multe ori. Construiesc totul din mai multe straturi. Hârtia nu trebuie s? fie prea groas? pentru a t?ia bine. Am luat 200g de hârtie pentru pere?i ?i am t?iat p?r?ile.


Im Moment komme ich mit meinem Bahnhof-Bau gut voran. Deshalb möchte ich mit dem Güterschuppe/Gütermagazin zu basteln beginnen. Es geht um den Güterschuppen im Bahnhof Cristian, zwischen Brasov und Zarnesti.
Ich habe in den letzten Jahren mehrere Fotos gemacht und ein paar einfache Messungen der Größe vorgenommen. Leider habe ich nicht alle Maße. Aber ich denke, ich kann damit leben. So hab ich mich hingesetzt und Schuppen gezeichnet. Ich werde den Schuppen aus Papier bauen und mit dem Cutter schneiden. Dies ist einen sehr preiswerte Methode.
Als erstes habe ich ein einfaches Muster gebaut und eine Stellprobe gemacht. Soweit scheint alles zu passen.

Soweit so gut. Ich habe einfach die Zeichnung mehrmals ausgedruckt. Ich baue alles aus mehreren Ebenen. Das Papier sollte nicht zu dick sein, damit es sich gut schneiden lässt. Ich habe für die Wände 200g Papier genommen und angefangen die Teile auszuschneiden.


Salut
Frank
 
Hello!

You have the plans of the warehouse on "Magazie... pe linia Craiova-Calafat"

It is the same construction, typo for CFR.
 
Look at this topic

https://forum.lokomotiv.ro/viewtopic.php?f=128&t=13833

and also here, with the plans

https://forum.lokomotiv.ro/viewtopic.php?f=104&t=13788&start=15
 
Dear Cosmin!

Yes, I know the construction of "Magazie ... pe linia Craiova-Calafat".
But I think that's not the same construction. This warehouse is much smaller. The dimension is about 6 x 16m, about 5,60m high. The doors are also about 2m wide, but only about 2.2m high. And there is no space left over the doors for large windows.

In comparison with freight cars you can see that.
Cristian_5384b.jpg
8a25d2fa-433c-4f44-a8bc-7c0600274ada_zpsrit3svon.jpg


And you can see that the tank/cistern? is much higher than the roof edge.
Cristian_6431.jpg


Salut
Frank
 
Yes, you are right. There are diferences.
Maybe someone else could help you with some dimensions...
 
Bun? seara!

Yes, my measurements are not accurate. But I think that I can live with it.
So, I glued the layers together. Then came the many wooden strips.
Cristian_5397.jpg
Cristian_5398.jpg

As far as that fits once and I could glue the walls together.
Cristian_5401.jpg

Next come the doors, windows and roof beams.

Da, m?sur?torile mele nu sunt exacte. Dar cred c? pot tr?i cu ea.
Deci, ea am lipit straturile împreun?. Apoi au venit multe ?ipci de lemn.
În m?sura în care se potrive?te o dat? ?i a? putea lipi pere?ii împreun?.
Apoi vor veni u?i, ferestre ?i grinzi de acoperi?.


Ja, ganz genau sind meine Maße nicht. Aber ich denke, dass ich damit leben kann.
So, ich habe die einzelnen Ebenen zusammengeklebt. Danach kamen die vielen Holzleisten dran.
Soweit passt das schon einmal und ich konnte die Wände zusammenkleben.
Als nächstes kommen die Türen, Fenster und Dachbalken.


Salut
Frank